French manufacturer
Since 1975
A complete range of control product
Innovative solutions
Featured products
-
Medium size enclosure for immersion heater, finned heaters with external adjustment knob, Y3P4
- Cover has deep recess for protected external knob, access from front or side of cover - Can receive backside holes for 1"1/4, 1"1/2, M45x2, fittings with double thread and inner nut, or single thread with rotating ring - Can accommodate wall mounting brackets - Can also receive back side holes for finned heating elements…
-
Paddle flow switches, reed switch contact, built-in 16A SPDT relay
General application in flow detection. Recommended mounting position is on horizontal pipes, but can be mounted in any position. For water flow detection on dia 15 to 100mm water pipes. The built-in relay with SPDT contact can be used on resistive loads up to 15A 250V. The pilot light shows the contact position.
-
Polypropylene immersion heater tube enclosure for highly corrosive environments, Y3C6
Screws: There is no external screw in this housing. Cover: Screwed cover, with Molded FKM (Viton) fluoroelastomeric polymer, silicone or NBR O-ring gasket. Cover can be tightened by hand or with a double hook wrench.
-
T connection box for heat tracing cables with antifreeze thermostat
This box allows to connect, with a good IP66 ingress protection, 2 rounds or flat heating cable to a round power cable or providing at the same time the continuity of the power line. The built-in disc thermostat provides the anti-freeze function. Terminals positions provide easy access, wiring is simple, including for braided heating cables.
-
Tee connection box for heat tracing cables
This box allows to connect, with a good ingress protection (IP66) , end-to-end, on field, a round or flat heating cable to a round power cable, and providing at the same time the continuity of the power line. An example of this type of connection is the feeding of heated drinking troughs in stables or…
Product Families
Upcoming Events
ABOUT JPC
We offer not only a technical ability but also a wide choice of products in order to define the right product for your application. Regarding disc thermostats, bimetal thermal protectors, and the bulb and capillary thermostats (for the models that we do not produce ourselves), our suppliers are world leaders in their fields of activity.
JPC is known for its industrial rod and bulb and capillary industrial thermostats, but also for thermostat wired assemblies our productions cover a wide range of applications. From hydraulic systems to catering equipment, professional medical equipment to military applications, our existing customers are the most quality regarding companies.
OUR CUSTOMER SERVICE
HEADQUARTERS
2 voie Gallo Romaine,
ZAC de la Bonne Rencontre,
77860 Quincy Voisins, France
New products
-
Very high temperature steatite connection blocks. Indirect pressure clamping, with pressure plate, not protected against electric shocks, 750V range
These terminal blocks have been developed to meet the specific needs of connections that must withstand very high temperatures, up to 500°C (930°F) permanently and 700°C (1290°F) peak. They also ensure the continuity of the connection in case of fire up to 950°C (1740°F) (Their subsequent replacement is then necessary). They are particularly intended for…
-
Steatite connection blocks 450V range Protected against accidental electric contact, stamped terminals, with double entries and double tightening, can be used as a very high temperature junction box
The BJ series differs from the BL series by its terminals, which are double input and double clamping. This configuration allows to independently clamp two conductors per input, while providing a significant economy of material.
-
Steatite connection blocks 450V range. Protected against accidental electric contact, stamped brass terminals, nickel plated steel screws
The BL series differs from the BU series by its terminals, which are stamped brass and not machined from rod. This configuration, which allows rectangular holes for the passage of conductors, also allows to admit a wider range of cross-sections, while providing a significant economy of material. This series has versions with direct pressure screws…
-
Steatite connection blocks with pressure screws, protected against electric shocks, 450V range
These high-quality terminal blocks allow efficient and easy wiring of halogen lamps, heating elements, infrared heaters, quartz tube heaters, as well as for the wiring of ovens, and professional catering and cooking equipment. Thanks to their construction, they are non-flammable and resistant to temperature and humidity without losing their electrical and insulating characteristics.
-
Steatite connection blocks, 250V range With pressure screws, protected against electric shock
These high-quality and small foot-print terminal blocks allow efficient and easy wiring of halogen lamps, heating elements, infrared heaters and quartz tube heaters. Because of their construction, they are non-flammable and resistant to temperature and humidity without losing their electrical and insulating characteristics.
-
Electric fire detection switches with thermal glass bulb for air duct
Fire detection in air ducts. This device operates electrical contacts for remote alarm and simultaneous control of electrical servo-controls such as electric cylinders, electric motors or solenoids, for opening or closing air conditioning dampers.
-
Electric fire detection switches with thermal glass bulb or fusible link, wall mounting
Fire detection in buildings. This device operates electrical contacts for remote alarm and simultaneous control of electrical servo-controls such as electric cylinders, electric motors or solenoids, for opening or closing air conditioning dampers, doors, sunroofs, and openings in exterior building walls.
-
Miniature electric fire detection switches with thermal glass bulb
Simple device for fire detection in buildings. This device is operating electrical contacts for remote alarm and simultaneous control of electrical servo-controls such as electric cylinders, electric motors or solenoids, for opening or closing air conditioning dampers, doors, sunroofs, and openings in building facades.